DAC crowdfunding now in progress

Doc B. · 116365

0 Members and 1 Guest are viewing this topic.

Offline davechen

  • Jr. Member
  • **
    • Posts: 35
    • about.me/dtchen
Reply #45 on: October 24, 2014, 02:56:52 AM
Just a quick reminder that today is the last day to get in on the free-Supra-USB-cable-with-your-DAC-order deal.

My order got in under the wire, right?



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #46 on: October 24, 2014, 05:35:20 AM
It sure did, Dave. Thank you!

I will try to have a photo of the back panel posted in the next day or two.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #47 on: October 27, 2014, 12:09:18 PM
We have officially begun the first DAC production run today, by ordering the two chips that need several weeks lead time - one large quantity order that takes a pretty long lead time for programming and the other a large quantity order to qualify for the license for the necessary Windows USB driver. Since we have  already achieved our funding goal we figured that by starting these now we should be able to deliver a little sooner than if we wait until the end of the funding period. In for a penny, in for a pound.

We still have a few DACs left in the first run. The closer you wait until the end of the funding period the better chance of your DAC order getting slated for the second run.
« Last Edit: October 27, 2014, 05:03:56 PM by Doc B. »

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #48 on: October 27, 2014, 12:38:17 PM
"Windows Driver License", god that must have killed you to pay for that :)

M.McCandless


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #49 on: October 27, 2014, 12:46:30 PM
"Windows Driver License", god that must have killed you to pay for that :)

LOL I gave up on Windows a long time ago. I'm a Linux guy myself.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #50 on: November 03, 2014, 01:15:34 PM
The available DACs continue to be reserved and we have comitted about 3/4 of the initial run. That means that, after I annex some units for demos, there are about half a dozen DACs left available in the first production run. We have analyzed the costs of a production run in some detail and it only makes sense to do another run when there are enough participants willing to commit to justify the quantity purchase of motherboards needed to make this economically feasible. Thus we will probably space out the production runs a bit and do the second run in spring of 2015. So if you don't want to wait that long it will be worthwhile to order a DAC from this initial run.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline aroide

  • Full Member
  • ***
    • Posts: 61
Reply #51 on: November 03, 2014, 05:15:33 PM
I pulled the trigger tonight.  They call me 'gadget boy' at work, and I have a reputation to uphold.  Can't wait!

Mac mini running Roon->
Mytek Brooklyn DAC+->
Darwin Truth RCA IC->
BeePre (BeeQuiet,  Mundorf Ag/Au/Oil, Sophia Royal Princess 300B)->
Audioquest Colorado->
Rogue Audio Atlas Magnum amp (Psvane small signal tubes, KT150s)->
Audioquest Gibraltar-speaker cables>
Magnepan 1.7 & REL T-5


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #52 on: November 03, 2014, 06:49:12 PM
Thank you, and thanks to everyone else who has come on board the last week or so!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #53 on: November 04, 2014, 12:46:51 PM
Looks like we now have about four DACs left in our first production run.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline pdxgrampa

  • Full Member
  • ***
    • Posts: 94
Reply #54 on: November 05, 2014, 07:11:42 AM
Hey Dan would you post the dimensions of the DAC and the battery kit if that's far enough along.

Thanks

Greg
Music Hall 5.1SE,EROS. OPPO 980HD, Music Hall 25.3 Dac. BeePre/BeeQuiet. Paramount V1.1 300B,Orca Deluxe W/ Subs/SPA250s.Stereomour W/Orca Deluxe. Crack W/Speeball(2) .Beyerdynamic 990s.Crackheadphone.


Offline Johnnycopy

  • Jr. Member
  • **
    • Posts: 20
Reply #55 on: November 06, 2014, 02:25:11 PM
I am in!  Excitedly looking forward to it.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #56 on: November 06, 2014, 02:47:23 PM
Thanks John! And thanks to all the folks who have ordered in the past few days. I think we have maybe two DACs available from our planned initial run of 40 units.

The DAC box is approximately 5" wide x 3.5" tall x 8" deep. The battery supply box dimensions are unknown at this point, but it will probably be a little bigger.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Loquah

  • Sr. Member
  • ****
    • Posts: 507
  • Accidental Tube Addict
    • Passion For Sound
Reply #57 on: November 09, 2014, 03:14:52 PM
I might be looking in the wrong places so apologies if this is easily found somewhere else, but is there an image of the finished product (casing, etc.) anywhere to be seen yet?

EDIT: Sorry - just found it for myself!  :-[

Check out my reviews on YouTube - https://youtube.com/c/passionforsound


Offline Hank Murrow

  • Full Member
  • ***
    • Posts: 221
  • Potter loving music and tubes....
    • Hank Murrow's World of Ceramics
Reply #58 on: November 29, 2014, 03:53:17 AM
Say Doc or Paul; How about an update on DAC progress for those who have ordered, and eagerly await news?

Cheers, Hank in Eugene



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9676
    • Bottlehead
Reply #59 on: November 29, 2014, 07:50:51 AM
The chips that take several weeks to be manufactured and programmed were ordered a while ago. We checked in with the motherboard manufacturer and they say they should have them and be able to begin board production by the end of December. In the meantime we are waiting for a delivery of chassis boxes to arrive any day so we can start on the cabinets.

John has reworked the display board to better fit the cabinet and he has further tweaked his software filter. 

We have also begun to acquire the components for the programmer that will burn the EEPROMs. Peebs hopes to have that assembled and tested in the next couple weeks.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.