6SN7 for Sex Amp

Cary · 2094

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Cary

  • Full Member
  • ***
    • Posts: 219
on: November 28, 2014, 10:55:21 AM
I just want to be sure is it safe to use the 6SN7 in the SEX 2.0 and 2.1 without changing anything?

Thanks!

Cary


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: November 28, 2014, 10:58:14 AM
You'll need 6SN7GTB's, and to be OK with them not providing their otherwise expected lifetime of service.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline johnsonad

  • Hero Member
  • *****
    • Posts: 1670
Reply #2 on: November 28, 2014, 02:00:46 PM
They need to be GTB tubes though as they are rated for 400v.

Aaron Johnson

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #3 on: November 30, 2014, 01:39:09 PM
Quote from: johnsonad on November 28, 2014, 02:00:46 PM
They need to be GTB tubes though as they are rated for 400v.
And they can take 5 watts on one plate - original 6SN7s are rated 2.5 watts maximum.

Paul Joppa

Offline boulos

  • Full Member
  • ***
    • Posts: 126
Reply #4 on: December 03, 2014, 02:30:30 AM
I've tried a few well used 6SN7GTB tubes in the SEX 2.1.  As cautioned before, the amp runs the tubes harder than usual for a 6SN7.  It has revealed a few tubes to be noisy (or perhaps it contributed to the issue).


Pages: 1   Go Up
« previous next »