News:
May 18, 2021, 01:44:01 AM

Author Topic: Too tall! (need caps)  (Read 1459 times)

0 Members and 1 Guest are viewing this topic.

Offline rmryan

  • Jr. Member
  • **
  • Posts: 41
Too tall! (need caps)
« on: April 05, 2015, 04:17:21 PM »
After mounting the 2200uF capacitors on the PCB as directed by the instructions and mounting it on the top plate the whole assembly is waaay too tall to fit in my Hammond box, and I bought the 2" high one!

I guess I'm going to have to mount them horizontally, but I've already soldered these in and clipped the leads, so I am going to have to purchase a couple of replacements.  Could I possibly have the digi-key part number for these Nichicons?
~^~^~^~^~^~^~^~^~^~^~
Richard Ryan
Bottlehead Customer
S.E.X. 2.0 w/ C4S w/ Blumenstein Orcas
Crack OTL w/ Speedball - Sennheiser HD600
Quickie and Quicksand
Stereomour II w/ Blumenstein Orcas & sub

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14969
Re: Too tall! (need caps)
« Reply #1 on: April 08, 2015, 08:51:11 AM »
They are Nichicon KA, 2200uf 35V.  (That's enough to bring up the correct part on multiple parts websites)

-PB
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline rmryan

  • Jr. Member
  • **
  • Posts: 41
Re: Too tall! (need caps)
« Reply #2 on: April 08, 2015, 03:03:29 PM »
Thanks, PB.  Found 'em.
~^~^~^~^~^~^~^~^~^~^~
Richard Ryan
Bottlehead Customer
S.E.X. 2.0 w/ C4S w/ Blumenstein Orcas
Crack OTL w/ Speedball - Sennheiser HD600
Quickie and Quicksand
Stereomour II w/ Blumenstein Orcas & sub