Some Dark Night....

Bill Epstein · 1741

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Bill Epstein

  • Full Member
  • ***
    • Posts: 104
on: May 17, 2015, 04:17:01 AM
...I'm going to catch up with whoever designed, then standardized all the sub-components of this type and size and change his singing voice!


VPI Traveler/ZYX R50
Cinemag 3440 AH
Steve Brown Caravaggio Phono
Foreplay 2.1
The Twins: 55 Watt Mullard 5-20 KT-88 mono-Blocks
4 Pi Speakers

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #1 on: May 17, 2015, 04:37:51 AM
The worst are the cheap Chinese ones from eBay that disintegrate when you try to solder them.  I chucked a bag of them in the bin out of frustration.

M.McCandless

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1021
Reply #2 on: May 21, 2015, 01:39:02 PM
What is that?


Offline Bill Epstein

  • Full Member
  • ***
    • Posts: 104
Reply #3 on: May 21, 2015, 03:47:00 PM
Quote from: aragorn723 on May 21, 2015, 01:39:02 PM
What is that?

DPDT toggle switch. 6 solder lugs in an area 15MM square! Don't use heat shrink, pay the price ;-}

VPI Traveler/ZYX R50
Cinemag 3440 AH
Steve Brown Caravaggio Phono
Foreplay 2.1
The Twins: 55 Watt Mullard 5-20 KT-88 mono-Blocks
4 Pi Speakers

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1021
Reply #4 on: May 21, 2015, 04:20:14 PM
got it..  that does sound pretty hard :-p  I think that was the hardest part about the Quickie, soldering in the potentiometer.  It would be fun to upgrade the pot, maybe by going with a submissive to take the easy way out lol 8)


Pages: 1   Go Up
« previous next »