Resistance check for #32

[email protected] · 2678

0 Members and 1 Guest are viewing this topic.

Offline [email protected]

  • Newbie
  • *
    • Posts: 2
on: June 29, 2015, 02:57:44 PM
Finished assembly last night, now on to resistance checks. Everything is OK except for #32. Manual shows a * but it reads 0 ohms. Both 29 and 32 are part of the ground bus (page 35) so i would expect it to read 0 ohms. All other resistance checks (including change in #45) check OK.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: June 30, 2015, 07:36:30 AM
Yup, looks like a typo.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline [email protected]

  • Newbie
  • *
    • Posts: 2
Reply #2 on: June 30, 2015, 07:42:23 AM
Thanks, from looking at the ckt and comparing the symmetric layout it seems it had to be 0 ohms, but since this is a new kit I just wanted to be doubly sure before applying power. Hard to put the smoke back in.