aluminum plate

[aragorn723]

Hi,

Is there somewhere I can buy an aluminum plate similar in size to the Quickie plate?  I would like to re-purpose an old quickie wooden frame and make an amp switcher with it.  Thanks,

Dave

[2wo]

If you don't mind drilling your own holes, http://www.onlinemetals.com
Otherwise Front panel express...John

[ALL212]

If what you're looking for resembles this:

http://bottlehead.com/smf/index.php?topic=8082.0

Let me know.

[aragorn723]

If what you're looking for resembles this:

http://bottlehead.com/smf/index.php?topic=8082.0

Let me know.

That's the idea, except i'm going to make a switcher for amplifiers to hook up to one pair of speakers.  Looks like that might be a lot of holes to drill though..  Got a drill press, I just never used it before. 

Dave

[ALL212]

I cheat.  I work at a metals distribution facility.  We've got a laser that cuts like butta! 

If you work up a drawing in dwg (front panel designer can export to dwg) and let me know what metal you want I can run a quote.  For comparison sake I just had them price me up a Crack plate but on a  10" x 12" in .08 aluminum - around $50 + shipping.  I do need a drawing to get a quote.

That's raw aluminum - no finish at all.

[JamieMcC]

ebay is the easy answer lots of different sizes available to choose from A4 300x200mm etc its only thin and will drill easily with a pilot hole followed by a stepper cutter for holes and a jigsaw will cut it easy enough with a metal cutting blade. Cover up with masking tape draw on your centres and head to the drill press 

[Grainger49]

If what you're looking for resembles this:

http://bottlehead.com/smf/index.php?topic=8082.0

Let me know.

This looks like he could buy an aluminum cookie sheet and cut it to size.

[Grainger49]

Paully built a scratch 45 amp.  His top plate is steel, 1/4" thick and weighed 35 pounds.  He wanted something that would not bend. 

[aragorn723]

Holy crap!  That's probably overkill for this project lol.  I might have to try out the drill press, it's been sitting in my Dad's garage for a few years now.  It might have to come with us when we move   Would 6061-T6 aluminum be a good choice for this? 

Dave

[Grainger49]

Dave,

No, Holy Crap, I made a bad typo.  It was 1/4" not 1.4". 

[aragorn723]

I was referring to the weight.  That's the weight of a chassis for most components.

Dave

[Grainger49]

Oh, he was tilting it and taking readings yesterday with it on.  I'm sure he was sweating from the voltages as well as the weight.  There is a lot of iron on the 35 pound plate.  I would guess it is an easy 50 pounds.