Tubes are lit, but LEDS are not.

mooopig · 1729

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline mooopig

  • Newbie
  • *
    • Posts: 3
on: December 31, 2016, 02:49:33 PM
This is my first build and all of the resistances have checked out, and the tubes are lighting, but the LEDs do not glow. In addition to the LEDs not glowing I am getting:
1: -1.3V
2: -1.3V
3:  0V
4: -1.3V
5: -1.3V
6: 0V
7: -.005V
8: 0V
9: 0V
10: 0V


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #1 on: December 31, 2016, 03:12:21 PM
Cap is backwards.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline mooopig

  • Newbie
  • *
    • Posts: 3
Reply #2 on: December 31, 2016, 06:20:15 PM
Sorry, do you know which one?
Quote from: fullheadofnothing on December 31, 2016, 03:12:21 PM
Cap is backwards.


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #3 on: December 31, 2016, 06:49:16 PM
RTFM.

Also your diode mounting is suspect, but harder to see.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #4 on: December 31, 2016, 08:47:04 PM
Hi,
Welcome to the forum.  Please go back and check the orientation of the capacitors, seems you have one backwards and any further actions may cause it to blow.  The manual has clear instructions on installing them, please look at the included pictures.
Also, check your positioning and soldering on the diodes.  Maybe practice soldering a few more times.
Attach some additional closeup pictures so we can help you out.
Happy New Year!!

Dammit, I'm half lit and I can be more polite than that to a newbie...I hate that acronym.

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's

Offline diynewbie

  • Full Member
  • ***
    • Posts: 68
Reply #5 on: January 01, 2017, 05:20:41 AM
The backwards capacitor is the one connected to U12/13 (capacitor closest to tube socket on the side with two capacitors).  The overlapping diode arrangement in the manual is to prevent the leads (to terminals 20 and 21 on each side) from contacting each other.  You picture looks like the inside leads may be in contact.  Also, it is not clear if there is contact between the A8 diode lead and the wire to A7.


Offline Adrian

  • Sr. Member
  • ****
    • Posts: 276
Reply #6 on: January 01, 2017, 07:28:04 AM
Quote from: fullheadofnothing on December 31, 2016, 06:49:16 PM
RTFM.

Also your diode mounting is suspect, but harder to see.
RTFM....Really?

Adrian C.

VPI Prime w/Ortofon Quintet Black MC/Rothwell MCL Lundahl SUT/EROS/Submissive (3 output mod)/Mainline/Crack - Speedball/S.E.X. 2.1 - C4S/S.E.X. 3.0 - C4S/Paramounts - Blumenstein 2.2 Mini-Max w/DOF mod -Senn HD600/Viso HP50/Focal Elear.

Offline mooopig

  • Newbie
  • *
    • Posts: 3
Reply #7 on: January 01, 2017, 08:21:14 AM
Fixed the capacitor and all the voltages checked out! And the amp is working fine! Thank you all for taking the time to reply (:

One more thing though would it be okay to make my own wooden base but take away 1/2 an inch from the height?
or is the height of the frame set so the amp can get the proper amount of ventilation?


Offline Leland Hankins

  • Jr. Member
  • **
    • Posts: 42
Reply #8 on: January 01, 2017, 09:50:33 AM
Yes, just so their is enough depth for ventilation, I rarely use the bottlehead rubber feet on the base.  If you are going to build a new base I recommend using 1/8-3/16" hobby plywood around the inside of the base , 3/4-1" wide, 3/16-1/4" below the top.  I like the reset look, use glue and air driven nails.  For me it is easier than cutting the groove and allows one to round over the inside top edge of the base.

Lee Hankins 


Pages: 1   Go Up
« previous next »