New Build resistance checks

cycogod · 4568

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline cycogod

  • Newbie
  • *
    • Posts: 8
on: December 08, 2020, 03:53:02 PM

everything reads good but on terminal 2 i get 19.5 m ohms . .

i believe this is a star value...does this seem ok. ?


thanks


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: December 08, 2020, 04:46:23 PM
Terminal 2 is wired to terminal 4, B2, B5, and 13.  Do you get the same resistance reading on all those terminals?

19.5 mega-ohms is 19,500,000 ohms, which would be OK.  19.5 milli-ohms is 0.019 ohms, which will cause some problems.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline cycogod

  • Newbie
  • *
    • Posts: 8
Reply #2 on: December 08, 2020, 05:23:37 PM
terminal 4 reads 794 k
b2 - 0
b5 - 0
13 - 0

i believe the numbers were M ohms,  meaning mega. so should be ok. sound correct?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #3 on: December 08, 2020, 05:26:52 PM
Oops, I saw "Crack" not "Crack-a-two-a".

14L should show the same DCR as 2L.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline cycogod

  • Newbie
  • *
    • Posts: 8
Reply #4 on: December 08, 2020, 05:35:18 PM
yes they do


Offline cycogod

  • Newbie
  • *
    • Posts: 8
Reply #5 on: December 08, 2020, 05:37:40 PM
feel pretty good. i'll read voltage tomorrow. thanks


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #6 on: December 09, 2020, 06:15:29 AM
Yes, then you are probably seeing 19.5 million ohms.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »