Attenuator Upgrade for Smash

Alonzo · 4672

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
on: February 09, 2015, 06:19:35 PM
Will the attenuator upgrade for the Smash be out soon?  Can I just drop a Submissive into it? Or will there be large changes to the Smash to make it fit?
Thanks,
Alonzo

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #1 on: February 10, 2015, 06:00:43 AM
The attenuator for Smash will use different resistor values than Submissive. We're focusing our energy on getting the first run of DACs completed at the moment, and we will probably tackle the attenuator upgrade kit for Smash in the spring.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Thoburn

  • Full Member
  • ***
    • Posts: 188
Reply #2 on: February 11, 2015, 07:07:25 AM
Will there be an attenuator upgrade for Stereomour as well?

Dynavector DV-20X2L > VPI Scout II > Musical Surroundings NovaPhonomena
Mac Mini > USB DACiTx
Stereomour > Lowther Medallion DX4 and Rythmic Subs
Monster Power HTS3600

Offline Alonzo

  • Sr. Member
  • ****
    • Posts: 461
  • Not all those who wander are lost
Reply #3 on: March 30, 2015, 08:09:01 PM
Smash is all complete, Smash up and Smash quiet installed.  Think I'm done with this one...
One error in the instructions:  on page 16, last step.  Writing has you connect to the fine switch while the picture connects to the coarse switch.  I followed the picture.

Alonzo
Gameroom:>Mainline to HD820, SR45 to Pipette
>BeePree Kaiju & SII to Altec 19 knockoffs
Office:>BH Stat amp to Koss 95x, T20 SET to JBL 4309s
Den:> MorePlay 845 SET to Altec Valencia's

Pages: 1   Go Up
« previous next »