Kit Assembly Gallery

Paul Birkeland · 30985

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #30 on: July 21, 2020, 07:36:40 AM
Here is a green Stereomour II that I just completed for a customer.  It is setup with a 4 pin balanced headphone jack up front for driving power hungry headphones off the speaker outputs.  The customer opted for the DC filament upgrade to keep it super quiet, as well as the shunt regulated driver supply. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Deke609

  • Guest
Reply #31 on: July 21, 2020, 08:20:06 AM
Very nice.  45 or 2A3 (or both)?  Either way, I think the purchaser will be very happy.

cheers, Derek



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #32 on: July 21, 2020, 09:39:22 AM
It's built for 45s.  Both isn't an option on the S2.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline thebellowsfold

  • Newbie
  • *
    • Posts: 4
Reply #33 on: August 28, 2020, 10:56:39 AM
Hello

  I have a S.E.X kit that I have 1/2 assembled that I need to get done.  I don't have a space to work on it anymore is this something you can help me out with?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #34 on: August 28, 2020, 11:29:44 AM
Yes, you can e-mail me at pb(at)bottlehead(dot)com and we can discuss this further.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #35 on: October 28, 2020, 08:10:42 AM
This is a Crack with a green vein top and walnut base I just finished.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Tom-s

  • Sr. Member
  • ****
    • Posts: 496
Reply #36 on: October 28, 2020, 11:09:51 AM
@PB could you explain how you got the top finish / color done? It looks very cool!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #37 on: October 28, 2020, 11:13:44 AM
A powder coating gun and an oven!

For powders with any kind of metallic particles, the Harbor Freight gun is pretty decent.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Tom-s

  • Sr. Member
  • ****
    • Posts: 496
Reply #38 on: October 28, 2020, 11:24:37 AM
I feared so. Out of my league for now! Looks to be worth a try on the next project. Truly inspiring builds PB.



Offline jtori

  • Full Member
  • ***
    • Posts: 125
Reply #39 on: January 09, 2021, 03:55:49 AM
All these builds look fabulous, Paul!  You're an engineer, artisan and artist!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #40 on: February 05, 2021, 01:51:45 PM
Eons ago (August), I put in an order for the chassis and input transformers for a super customized BeePre, and the input transformers finally showed up!  This particular customer wanted two balanced inputs as well as balanced outputs, so I had to use an 8P3T switch in order to switch each set of XLR jacks into the input transformers, then to either switch between the input transformers or the one set of unbalanced input jacks.  I made this similar in size to one of the BeePre 2 prototypes I made some years ago and powder coated it black, then installed MonAmour transformer covers over the power transformers. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline johnsonad

  • Hero Member
  • *****
    • Posts: 1670
Reply #41 on: February 05, 2021, 03:26:17 PM
Holy smokes!  That looks great, nice work PB! Congrats to the new owner!

Aaron Johnson


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #42 on: February 05, 2021, 03:29:25 PM
I couldn't quite talk him into the remote like yours has. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline johnsonad

  • Hero Member
  • *****
    • Posts: 1670
Reply #43 on: February 06, 2021, 12:31:14 AM
That ladder attenuator is the bees knees. You should post a photo of my build here too.

Aaron Johnson


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19627
Reply #44 on: February 06, 2021, 05:40:02 AM
Sure thing!

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man