News: Trouble logging in? Log in from the login page.
September 30, 2020, 06:10:52 PM

Author Topic: Kit Assembly Gallery  (Read 4444 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 13595
Re: Kit Assembly Gallery
« Reply #30 on: July 21, 2020, 07:36:40 AM »
Here is a green Stereomour II that I just completed for a customer.  It is setup with a 4 pin balanced headphone jack up front for driving power hungry headphones off the speaker outputs.  The customer opted for the DC filament upgrade to keep it super quiet, as well as the shunt regulated driver supply. 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Online Deke609

  • Hero Member
  • *****
  • Posts: 1201
Re: Kit Assembly Gallery
« Reply #31 on: July 21, 2020, 08:20:06 AM »
Very nice.  45 or 2A3 (or both)?  Either way, I think the purchaser will be very happy.

cheers, Derek
Derek
______

Roon Intel NUC ->  Yggdrasil DAC -> BeePre (w/ BeeQuiet and EML 300B)  -> Kaiju (w/ DCFil and EML 300B) or Stereomour II (2A3 [EML Mesh] and 45 Conversion [EML 45B])  -> Audeze LCD4

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 13595
Re: Kit Assembly Gallery
« Reply #32 on: July 21, 2020, 09:39:22 AM »
It's built for 45s.  Both isn't an option on the S2.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline thebellowsfold

  • Newbie
  • *
  • Posts: 4
Re: Kit Assembly Gallery
« Reply #33 on: August 28, 2020, 10:56:39 AM »
Hello

  I have a S.E.X kit that I have 1/2 assembled that I need to get done.  I don't have a space to work on it anymore is this something you can help me out with?

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 13595
Re: Kit Assembly Gallery
« Reply #34 on: August 28, 2020, 11:29:44 AM »
Yes, you can e-mail me at pb(at)bottlehead(dot)com and we can discuss this further.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man