Kit Assembly Gallery

Paul Birkeland · 157382

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
on: November 13, 2018, 07:14:33 AM
Here are some photos of various BH kits that I have built for myself and other folks with some of the finishes and wood species that I stock.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: November 13, 2018, 07:15:24 AM
Here is my favorite color combination: walnut and wrinkle black. 
« Last Edit: November 13, 2018, 07:22:34 AM by Paul Birkeland »

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #2 on: November 13, 2018, 07:19:23 AM
The silver and copper vein powders are also a popular choice. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: November 13, 2018, 07:27:46 AM
For a more wild look, wrinkle red and wrinkle blue give lots of contrast. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #4 on: April 29, 2019, 10:56:19 AM
Another walnut/black Crack rolling off the line.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Deke609

  • Guest
Reply #5 on: April 29, 2019, 01:59:45 PM
The amp looks great.  Bu what really caught my eye was the cool wallpaper.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #6 on: June 19, 2019, 10:32:56 AM
A customer came to me and wanted a Crack built that more or less matched his Victrola phonograph.  The wood for these was listed as "red mahogany", and it did indeed look like actual mahogany, so I purchased a piece with good straight grain and some red dye and made a red base that looks quite similar.  The top plate is done in gold vein to give it a bit of an antique look.


...My fingers are still red in a few spots.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Jamier

  • Sr. Member
  • ****
    • Posts: 382
Reply #7 on: June 20, 2019, 06:54:32 AM
PB,

     do you rabbit with a router bit (with a bearing) or do you do it on a table?

Jamie

James Robbins


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #8 on: June 20, 2019, 07:28:36 AM
I can do it either way, but it's far easier to setup on a table saw.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline oguinn

  • Global Moderator
  • Sr. Member
  • *****
    • Posts: 896
Reply #9 on: June 20, 2019, 07:49:16 AM
PB - Do you have any interest in submitting any of these to the gallery site I built? You're not quite the typical DIYer, but the goal is to show people what is possible. No pressure, obviously, just thought I'd offer.
« Last Edit: June 20, 2019, 07:50:58 AM by oguinn »

Jameson O'Guinn

-

Main System: Schiit Bifrost MB, Rega Planar 6 with Exact cartridge, Eros 2, BeePre, Kaiju/Stereomour II, Jagers, Mainline

Desktop System: Crack with Speedball


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #10 on: June 21, 2019, 04:19:10 AM
I'll have to get setup with some external image hosting.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline oguinn

  • Global Moderator
  • Sr. Member
  • *****
    • Posts: 896
Reply #11 on: June 21, 2019, 04:25:50 AM
Sure thing. A couple people have either emailed pictures or uploaded them to Imgur. Once they're there I just grab them and host them locally on my site, so a longer term solution isn't super necessary.

Jameson O'Guinn

-

Main System: Schiit Bifrost MB, Rega Planar 6 with Exact cartridge, Eros 2, BeePre, Kaiju/Stereomour II, Jagers, Mainline

Desktop System: Crack with Speedball


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #12 on: August 13, 2019, 09:34:23 AM
Here's a black Crack I just completed.  The owner wanted the base to match some other components and furniture with a black ash finish, so I built a base out of ash and soaked it in black dye over the course of about a week.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline grufti

  • Sr. Member
  • ****
    • Posts: 320
Reply #13 on: August 13, 2019, 09:50:45 AM
Great look. Well done, Paul.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #14 on: August 13, 2019, 09:51:09 AM
Nice one!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.