Possible Channel Imbalance[Solved]

XforceVesa2 · 29050

0 Members and 3 Guests are viewing this topic.

Offline XforceVesa2

  • Jr. Member
  • **
    • Posts: 37
Reply #60 on: February 08, 2020, 08:27:07 AM
You're the only one...

I did leave space in the layout to add feedback resistors, which would tighten up the channel balance.

Ok..(I thought that some Imbalance is normal on this Amp(So I have misunderstood this))  :/

If I want to add feedback resistors in this circuit where must they placed?

Before I consider to add feedback resistors in this circuit, should I resolder the solder joints from the Input Tube Socket and from the High Current PC Boards?

« Last Edit: February 08, 2020, 08:28:41 AM by XforceVesa2 »

PC/Hackintosh with Roon -> RME ADI-2 DAC(Cinch LineOut: Ref Level: +7dBu @ 0.0dB) -> Bottlehead Crackatwoa AMP -> Sennheiser HD 600


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19702
Reply #61 on: February 08, 2020, 08:29:19 AM
No, I meant that most builders wouldn't be bothered by half a dB of imbalance. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline XforceVesa2

  • Jr. Member
  • **
    • Posts: 37
Reply #62 on: February 08, 2020, 08:37:37 AM
No, I meant that most builders wouldn't be bothered by half a dB of imbalance.

Ok... now I got it.

As this is no real issue, this thread can be seen as Solved and I want to apologize for my nitpicking with the Channel Balance as I'm just waste your and my Time, to fix an Issue what's not an real issue.(As I have tested it for myself that I shouldn't be able to hear this Imbalance).
« Last Edit: February 08, 2020, 08:50:39 AM by XforceVesa2 »

PC/Hackintosh with Roon -> RME ADI-2 DAC(Cinch LineOut: Ref Level: +7dBu @ 0.0dB) -> Bottlehead Crackatwoa AMP -> Sennheiser HD 600