News: Trouble logging in? Log in from the login page.
May 31, 2020, 07:40:31 AM

Author Topic: Trim pot question  (Read 57 times)

0 Members and 1 Guest are viewing this topic.

Offline oguinn

  • Sr. Member
  • ****
  • Posts: 600
    • DIY Audio Gallery
Trim pot question
« on: May 20, 2020, 09:37:58 AM »
Trimming of the lead notwithstanding, does this look like a properly installed trim pot? This is the A side and the bent over lead is under the screw.
Jameson O’Guinn

-

Main System: Schiit Bifrost MB, Schiit Sol, Eros 2, BeePre, Kaiju/Stereomour II, Jägers

Desktop System: Crack with Speedball

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 12819
Re: Trim pot question
« Reply #1 on: May 20, 2020, 10:04:19 AM »
I don't see any issues.  Even if you bend the middle lead to the wrong side and solder it down, the amp will still work 100% properly, you'll just have to adjust the trim pot the other way to get the desired result when setting the bias.

-PB
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline oguinn

  • Sr. Member
  • ****
  • Posts: 600
    • DIY Audio Gallery
Re: Trim pot question
« Reply #2 on: May 20, 2020, 10:05:14 AM »
Cool, thank you. Mostly wanted to make sure I interpreted the instructions correctly.
Jameson O’Guinn

-

Main System: Schiit Bifrost MB, Schiit Sol, Eros 2, BeePre, Kaiju/Stereomour II, Jägers

Desktop System: Crack with Speedball