Moreplay VDC reading out of range

Freddyhoule · 998

0 Members and 1 Guest are viewing this topic.

Offline Freddyhoule

  • Newbie
  • *
    • Posts: 6
on: April 05, 2021, 05:17:42 AM
Everything worked well until page 38. The reading of the voltage shows 334 VDC. I checked all my soldering and they seem to be OK. Is it still within a safe range? If not, is there an other way than redo every solder to solve my problem ?  Please note that I'm a total newbee. I dont know if it can be of any help, but the AC reading done at the beginning was 123. 



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: April 05, 2021, 05:19:47 AM
334 is kind of high, but if your line voltage is wandering high it may not be the end of the world.  I think you could continue with the build, but it might be a good idea to post some build photos so we can see what you have going on to be sure everything looks OK.


Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Freddyhoule

  • Newbie
  • *
    • Posts: 6
Reply #2 on: April 05, 2021, 07:21:09 AM
Some pics. Hope it can help. Maybe it doesnt show but my soldering skills are improving...  Thanks!



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #3 on: April 05, 2021, 10:01:57 AM
I would do a lot more trimming, especially with those leads that are wrapped around the sides of the terminals.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man