Waiting for the price of that pricey cap/wire/whatever to come down?

Downhome Upstate · 13446

« previous next »
Pages: 1 2 3 4 5 6   Go Down

0 Members and 1 Guest are viewing this topic.

Offline HF9

  • Sr. Member
  • ****
    • Posts: 346
  • Zynsonix.com
    • Zynsonix.com
Reply #30 on: July 16, 2013, 08:42:13 AM
I think someone should try a pair of these Duelunds in their PreBee:

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fwww.partsconnexion.com%2Fmedia%2Fproduct%2Fcapacitors%2F76756.jpg&hash=05dc3f3ce0e687befaa55008c772d484b6aa3ed4)

Only $749.95 each, what's to lose?  ;D

My DIY Audio Electronics Blog: DIYAudioBlog.com

Offline corndog71

  • Sr. Member
  • ****
    • Posts: 593
Reply #31 on: July 16, 2013, 08:47:00 AM
Quote from: Tickwomp on July 16, 2013, 08:39:29 AM
Lol, I bought 6 CuTF Vcaps in .1uf because I need 4 and I couldn't interest anyone in going in with me to get a better price.  I burned in 2 pairs of these bad boys for 5 days days solid and soldered them into place Audio Note Kit DAC and Pre replacing the Audio Note Copper coupling caps.   I knew there was going to be a difference, but dang...  I love it already, and they should get fractionally better and they get fully burned in.  Highly recommended!

Tick

I considered your offer but have too many other projects on my plate.  A friend put those CuTF caps in his BAT preamp and said it's never sounded better.  They are tempting but $$$$ ouchy.

The world was made for those not cursed with self-awareness.

Rob

Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #32 on: July 16, 2013, 11:13:36 AM
Ok, I didn't say I wasn't going to spend the cash, but it is still more than I want to pay.


Offline 2wo

  • Hero Member
  • *****
    • Posts: 1261
  • Test
Reply #33 on: July 16, 2013, 03:23:46 PM
Hey Tick, I too was very tempted to jump in with you. At the time I wasn't sure in what direction the new SR-45 was going...John

John S.

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5834
Reply #34 on: July 16, 2013, 05:38:05 PM
Quote from: 2wo on July 16, 2013, 03:23:46 PM
Hey Tick, I too was very tempted to jump in with you. At the time I wasn't sure in what direction the new SR-45 was going...John
I was just thinking yesterday, how much I would like to include TFTF coupling caps if I could. I have serious doubts they will fit in the cost structure though.

Paul Joppa

Offline Tickwomp

  • Full Member
  • ***
    • Posts: 72
Reply #35 on: July 16, 2013, 06:11:15 PM
Quote from: Paul Joppa on July 16, 2013, 05:38:05 PM
Quote from: 2wo on July 16, 2013, 03:23:46 PM
Hey Tick, I too was very tempted to jump in with you. At the time I wasn't sure in what direction the new SR-45 was going...John
I was just thinking yesterday, how much I would like to include TFTF coupling caps if I could. I have serious doubts they will fit in the cost structure though.

Lol, sounds like a ringing endorsement to me! 

Mach2 Mac Mini->Amarra Mini-> Chronos Athena USB Cable->Audio Note 4.1LE DAC->24ga Ag w/WBT0101ag ICs-> Audio Note L4 Remote->24ga Ag w/WBT0102Ag ICs-> Paramounts w/MQ Nickel Opts and EML 2a3 Mesh Plates->16ga Ag Bi Wire->Klipsch RF-7 w/DeanG Mods

Offline corndog71

  • Sr. Member
  • ****
    • Posts: 593
Reply #36 on: July 17, 2013, 03:45:37 AM
Quote from: Paul Joppa on July 16, 2013, 05:38:05 PM
I was just thinking yesterday, how much I would like to include TFTF coupling caps if I could. I have serious doubts they will fit in the cost structure though.

With the rising sophistication (and price) of Bottlehead kits, what's another $400?  :D

The world was made for those not cursed with self-awareness.

Rob

Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #37 on: July 17, 2013, 04:06:26 AM
Its a slippery slope when you start with this cap and that cap, then you have to look at everything else. Dont mean to be the fly in the ointment but IMO/experience resistors make an even bigger difference...

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.

Offline corndog71

  • Sr. Member
  • ****
    • Posts: 593
Reply #38 on: July 17, 2013, 04:11:43 AM
I'm just playing around.  Keep the cheap caps and lower prices.  But maybe Eric has a point.  We need better sounding resistors!

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2F24.media.tumblr.com%2Ftumblr_lu4ohj5ZNE1qb54cyo1_500.jpg&hash=b4c7c091f6abbec8f9474d1209241d77e8bfba3a)

The world was made for those not cursed with self-awareness.

Rob

4krow

  • Guest
Reply #39 on: July 17, 2013, 05:20:14 AM
Ohmmmm, LOL your killing me. This thread is hard for me to know if it's poking fun or tempting. heh heh maybe both. Why can't we all just get a long wire-wound resistor? I'm thinking that any cap bigger than a stick of dyno-mite!(70's flashback) is suspect.


Offline najo49

  • Full Member
  • ***
    • Posts: 169
Reply #40 on: July 17, 2013, 08:26:10 AM
I have as a result of my reading,put Mundorf supreme in my paramore 2a3 and my parafeed cap in my 45 amp. I thought about the silver oil but I had to save a get the supreme. I bought a .1 silver oil used for the interstage cap in my paramores. Is the difference big between the silver oil and the supreme?

Jann Olsen, [email protected].  Lowther medallion 2 with pm2a./ extended foreplay lll,/EROS phono /Grado ref/ SOTA star Vacuum SME V, /  45 amp direct coupled,c4s,mQ nickel  / paramour  2a3 w MQ iron /Original SEX monos /Jena Cables /heathkit wm6a/ proAc Tablette 50 sig , with push pull

Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #41 on: July 17, 2013, 01:19:26 PM
Quote from: najo49 on July 17, 2013, 08:26:10 AM
I have as a result of my reading,put Mundorf supreme in my paramore 2a3 and my parafeed cap in my 45 amp. I thought about the silver oil but I had to save a get the supreme. I bought a .1 silver oil used for the interstage cap in my paramores. Is the difference big between the silver oil and the supreme?

I would not sweat the difference! I use both. Try a few high value tantelum resistors in key spots and see what you think!

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.

Offline najo49

  • Full Member
  • ***
    • Posts: 169
Reply #42 on: July 18, 2013, 08:08:08 AM
Eric, where would one obtain the tantalam resistors? my 45 amp is direct coupled c4s to a parafeed output there is one resistor and one cap in the signal path. So the resistor is a 350 or so ohm and the parafeed cap is 3.3 mundorf supreme.with MQ nickel iron.

Jann Olsen, [email protected].  Lowther medallion 2 with pm2a./ extended foreplay lll,/EROS phono /Grado ref/ SOTA star Vacuum SME V, /  45 amp direct coupled,c4s,mQ nickel  / paramour  2a3 w MQ iron /Original SEX monos /Jena Cables /heathkit wm6a/ proAc Tablette 50 sig , with push pull

Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #43 on: July 18, 2013, 09:54:07 AM
Choice is 330R or 390R.

Angela Instruments has 330R and 390R 1/2 watt.
http://angela.com/shinkohtaftantalumresistors12watt.aspx

Parts Connexion has 330R and 390R, 1/2, 1 & 2 watts.
http://www.partsconnexion.com/resistors_tantalm.html

Hifi Collective has 330R and 390R, 1/2, 1 & 2 watts.
http://www.hificollective.co.uk/components/tantalums.html


I'll let you get sticker shock first hand!

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's

Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #44 on: July 18, 2013, 10:03:00 AM
Thanks Geary! - if you only have the one resistor I would go with the two watt.

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.

Pages: 1 2 3 4 5 6   Go Up
« previous next »