Author Topic: eros hum and sound quality (Read 13058 times)

mkontor · « **Reply #45 on:** September 05, 2013, 03:47:13 AM »

Dan
The Eros had arrived at yours...
Mike

Doc B. · « **Reply #46 on:** September 05, 2013, 05:18:22 AM »

PB should be in the lab today and will have a look at it.

mkontor · « **Reply #47 on:** September 09, 2013, 02:46:24 AM »

I would prefer to be contacted by email michaelkontor (at) bigpond (dot) com rather than on here.

mkontor · « **Reply #48 on:** September 10, 2013, 04:33:55 AM »

Dan - no progress yet?

Doc B. · « **Reply #49 on:** September 10, 2013, 06:47:48 AM »

We are incredibly busy this week, but PB has been working on it. There was some shipping damage, it appears that a part or two is somewhat melted from the soldering iron during construction, etc. and he is working to get it into condition to be able to test it.

mkontor · « **Reply #50 on:** September 18, 2013, 09:51:04 PM »

Just let you know I was able to measure the pioneer head...impedance is 250 at 100Hz, inductance is 170....mike

Author Topic: eros hum and sound quality (Read 13058 times)

mkontor

Re: eros hum and sound quality

Doc B.

Re: eros hum and sound quality

mkontor

Re: eros hum and sound quality

mkontor

Re: eros hum and sound quality

Doc B.

Re: eros hum and sound quality

mkontor

Re: eros hum and sound quality