Intermittent popping sound Quicksand

frank bare · 2937

0 Members and 1 Guest are viewing this topic.

Offline frank bare

  • Jr. Member
  • **
    • Posts: 21
on: February 13, 2016, 05:03:05 AM
Just completed build on Quicksand. What is with an occasional popping sound? Rechecked solder joints and re-seated chip.
Amp otherwise performs great!  Paired with Quickie.

Thanks again for your help,
Bare






Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 994
Reply #1 on: February 13, 2016, 06:07:02 AM
Maybe the batteries on the quickie or quicksand are low? Voltage starvation could cause pops.



Offline frank bare

  • Jr. Member
  • **
    • Posts: 21
Reply #2 on: February 14, 2016, 09:28:15 AM
Thanks for the update. The batteries are all new. Perhaps it could be one of the Quickie tubes? It doesnt happen often,
but if I leave it on without music playing I'll get an occasional pop.
Bare



Offline Bonzo

  • Sr. Member
  • ****
    • Posts: 251
  • My name is Marco, best known as Bonzo
Reply #3 on: February 14, 2016, 10:14:20 AM
I had the same problem.
I had to resolder all the connection for the filament heater and it worked like a charm, untill I discover I have a fault tube socket.
Try to move a bit the tube and see if it causes pops too.

But please, wait also the response of the Bottlehead crew before tryig anything!

Ciao!

Bisogna avere orecchio!