News:
April 23, 2021, 08:17:38 AM
« previous next »
Pages: 1 ... 135 136 [137] 138 139 ... 154   Go Down

Author Topic: Tube Rolling w/Crack  (Read 547505 times)

0 Members and 2 Guests are viewing this topic.

Online oguinn

  • Sr. Member
  • ****
  • Posts: 749
    • DIY Audio Gallery
Re: Tube Rolling w/Crack
« Reply #2040 on: November 19, 2019, 05:27:31 AM »
I paid about $15 per tube, so I don't feel too salty. They were transparent about what they were, I just didn't read too closely. I needed a new 6080 and the price was right ¯\_(ツ)_/¯
Logged
Jameson O’Guinn

-

Main System: Schiit Bifrost MB, Schiit Sol, Eros 2, BeePre, Kaiju/Stereomour II, Jägers, Mainline

Desktop System: Crack with Speedball

Offline Zarno

  • Jr. Member
  • **
  • Posts: 19
Re: Tube Rolling w/Crack
« Reply #2041 on: November 20, 2019, 12:55:43 AM »
Thank you guys for your adequate help!!!

So I did re plug my headset correctly....still scratches when sometimes I touch the plugs!!!!
Logged
1)PC to M2Tech USB to Audiomat Tempo 2.5 Dac to Bottle Head Crack with speedball to HD 650
2)Cayin N5 or I5 to HD 580 with Alo balanced Green Cable
3) Cayin N3 to Sony Wh 1000xm3 or Buy Other Sound Equipment Sport earbuds

Offline Zarno

  • Jr. Member
  • **
  • Posts: 19
Re: Tube Rolling w/Crack
« Reply #2042 on: November 20, 2019, 12:58:18 AM »
Tfk "positive" diamond on the 12au7.....
Logged
1)PC to M2Tech USB to Audiomat Tempo 2.5 Dac to Bottle Head Crack with speedball to HD 650
2)Cayin N5 or I5 to HD 580 with Alo balanced Green Cable
3) Cayin N3 to Sony Wh 1000xm3 or Buy Other Sound Equipment Sport earbuds

Offline Zarno

  • Jr. Member
  • **
  • Posts: 19
Re: Tube Rolling w/Crack
« Reply #2043 on: November 20, 2019, 01:00:31 AM »
Bottom plaque.........
I need to sort out the cold joints problem!!!!
Any other advice of people using combos with telefunken NOS genuine tubes :D???
Logged
1)PC to M2Tech USB to Audiomat Tempo 2.5 Dac to Bottle Head Crack with speedball to HD 650
2)Cayin N5 or I5 to HD 580 with Alo balanced Green Cable
3) Cayin N3 to Sony Wh 1000xm3 or Buy Other Sound Equipment Sport earbuds

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14832
Re: Tube Rolling w/Crack
« Reply #2044 on: November 20, 2019, 04:19:13 AM »
You're also missing some wiring on your headphone jack.
Logged
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Zarno

  • Jr. Member
  • **
  • Posts: 19
Re: Tube Rolling w/Crack
« Reply #2045 on: November 20, 2019, 08:14:11 AM »
Ok Paul...can you tell me more about what to do??
Logged
1)PC to M2Tech USB to Audiomat Tempo 2.5 Dac to Bottle Head Crack with speedball to HD 650
2)Cayin N5 or I5 to HD 580 with Alo balanced Green Cable
3) Cayin N3 to Sony Wh 1000xm3 or Buy Other Sound Equipment Sport earbuds

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14832
Re: Tube Rolling w/Crack
« Reply #2046 on: November 20, 2019, 08:22:21 AM »
Refer to the manual that came with your kit and the section about wiring up the headphone jack.
Logged
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Online oguinn

  • Sr. Member
  • ****
  • Posts: 749
    • DIY Audio Gallery
Re: Tube Rolling w/Crack
« Reply #2047 on: November 20, 2019, 09:20:09 AM »
Page 44 has a section on output wiring. You should have connections on each of the headphone jack's lugs. You might want to create a new thread about it so it doesn't get lost in the shuffle of a long thread about tube rolling.
Logged
Jameson O’Guinn

-

Main System: Schiit Bifrost MB, Schiit Sol, Eros 2, BeePre, Kaiju/Stereomour II, Jägers, Mainline

Desktop System: Crack with Speedball

Offline diynewbie

  • Full Member
  • ***
  • Posts: 61
Re: Tube Rolling w/Crack
« Reply #2048 on: November 21, 2019, 01:54:39 AM »
Quote from: Zarno on November 20, 2019, 12:55:43 AM
So I did re plug my headset correctly....still scratches when sometimes I touch the plugs!!!!

If you did force the plugs in incorrectly, you may have damaged/spread the socket for the small pin.  I think this could result in a poor connection for the small pin and could give you the scratchy noise.  I would try using the headphones on another device to see if that is the issue. 
Logged

Online oguinn

  • Sr. Member
  • ****
  • Posts: 749
    • DIY Audio Gallery
Re: Tube Rolling w/Crack
« Reply #2049 on: November 22, 2019, 05:59:22 AM »
On the recommendation of this thread I got a pair of Thomson 6080WAs and that, paired with a Mullard CV4003, is my new favorite pairing for this amp.
Logged
Jameson O’Guinn

-

Main System: Schiit Bifrost MB, Schiit Sol, Eros 2, BeePre, Kaiju/Stereomour II, Jägers, Mainline

Desktop System: Crack with Speedball

Offline Zarno

  • Jr. Member
  • **
  • Posts: 19
Re: Tube Rolling w/Crack
« Reply #2050 on: November 24, 2019, 12:16:42 AM »
thanks to all of you !!!
enjoy your music.....
Logged
1)PC to M2Tech USB to Audiomat Tempo 2.5 Dac to Bottle Head Crack with speedball to HD 650
2)Cayin N5 or I5 to HD 580 with Alo balanced Green Cable
3) Cayin N3 to Sony Wh 1000xm3 or Buy Other Sound Equipment Sport earbuds

Offline watonwak

  • Jr. Member
  • **
  • Posts: 20
Re: Tube Rolling w/Crack
« Reply #2051 on: November 27, 2019, 06:18:24 AM »
Can I just double check that it is okay to use an E80CC with a Crack with the Speedball installed? I dont need to make any other modifications?
Logged

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14832
Re: Tube Rolling w/Crack
« Reply #2052 on: November 27, 2019, 11:48:39 AM »
There is a value change for R1 on the small PC board up front for the E80CC.  I am remembering that 470 ohms is a good choice for that position.
Logged
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Tom-s

  • Sr. Member
  • ****
  • Posts: 446
Re: Tube Rolling w/Crack
« Reply #2053 on: November 27, 2019, 07:34:07 PM »
Here's the thread about optimizing the current flow with E80CC / 12BH7's in Crack.
U can use the E80CC without this mod, but it does sound better with the mod.
https://forum.bottlehead.com/index.php?topic=5989.0
Logged

Offline watonwak

  • Jr. Member
  • **
  • Posts: 20
Re: Tube Rolling w/Crack
« Reply #2054 on: November 27, 2019, 10:37:29 PM »
Any tips for removing the resistors from the board? Just heat up the pins at the pad from the top side and pull out?
Logged
Pages: 1 ... 135 136 [137] 138 139 ... 154   Go Up
« previous next »